Presenza QR025 Instruction Manual download pdf (Page 14)

Maintenance

REPLACING FILTERS

When lters need replacing, exchange with similar. Also replace

lters that are damaged with punctures, bends, or broken

frames.

- Turn off the range hood and disconnect the power.

- Replace with an equivalent lter, then reconnect the

power.

REPLACING LIGHT BULBS

When light bulbs burn out, replace them with a 25W or 35W/JDR

16, GU10 twist and lock base light bulb.

- Turn off the range hood, disconnect it from its power

source, and ensure that the lights are cool.

- Turn the bulb (1) counter-clockwise and pull it out to

remove it.

- Push in the new bulb (2) and turn it clockwise. Do not

release the bulb until you are sure the bulb has been

securely installed. Then reconnect the power.

- If new bulbs do not operate, ensure that they are

inserted correctly.

DANGER: Turn off the power circuit breaker or the power

switch on the junction box before performing maintenance.

Touching circuitry inside the range hood while it is energized

will result in death or serious injury.

WARNING: Failure to replace worn out or damaged lters

will increase the risk of re.

WARNING: Light bulbs can become hot when turned on.

Do not touch bulbs until they are switched off and cooled.

Touching hot bulbs could cause serious burns.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Presenza QR025 Instruction Manual Page 14